As a Fiber Optics Engineer, Make Sure You’re Using a Reliable OTDR Device

If you work in the field of fiber optics as an engineer, you likely use equipment such as the Fluke OTDR, or optical time-domain reflectometer, on a regular basis. With a Fluke test set, you can be certain that the optical fibers you are using to establish efficient communication meet calibration standards.

This means of electronic calibration uses optical pulses to test the fibers. Onsite calibration can determine the length of the fibers, whether there has been any reduction in flux, and confirm that the integrity of the fibers has not been compromised in any way. You will also want to make sure that none of the fibers have been lost.

Fluke OTDRs are available in a number of forms, whether it be the larger and heavier full-feature version or the handheld version. there is also the fiber break locator, which is used to determine where a serious and detrimental fiber event is located. Though it cannot solve the problem itself, it can measure exactly how far away the problem is.

The importance of having a quality calibration device such as the Fluke OTDR cannot be overstated. For example, if you are in charge of an extensive computer network, you’ll need to be certain that you can rely on the fibers to be effective in facilitating the proper functioning of the network through its cables.

If you have further questions, comments, or tips on how to find the best OTDR devices, be sure to visit the forum below and make your thoughts known.